Silicone Rubber Coated Fiberglass Fabric
Silicone rubber compounded in special formula is applied to coat or impregnate on one side or both sides of fiberglass fabrics, for use in applications where require heat resistance, spark safety, chemical resistance, or abrasion resistance.The operating temperature is from -50°C to +250°C normally. Due to its good performance on heat resistance, weatherproof, moisture proof, and chemical resistance to acid, alkali, and also good flexibility with abrasion resistance, our silicone coated fiberglass fabrics are fabricated and used directly for the following
Applications:
- Removable or reusable insulation jackets, mattress and pads; Fabric expansion joints and compensators;
- Fabric ductwork connector;
- Furnace curtains, welding curtains, welding blankets and fire blankets;
- Protective air cargo covers;
- Noise control barriers;
- Weather-proof or moisture-proof covers;
- Firefighting apparel
Below are our product range for Silicone Rubber Coated Fiberglass Fabric
| Product | Weight of base fabric | Coating Side | Coating Weight | Total Weight | Colour |
| SR430CFD | 430 | Single side | 90 | 520 | Red / silver grey / black |
| Both sides | 150 | 580 | Red / silver grey / black | ||
| Single side | 70 | 500 | Red / silver grey / white | ||
| Both sides | 130 | 560 | Red / silver grey / white | ||
| SR840CFS | 840 | Single side | 150 | 990 | Red / silver grey |
| Both sides | 250 | 1090 | Red / silver grey | ||
| Single side | 120 | 960 | Red / silver grey | ||
| Both sides | 200 | 1040 | Red / silver grey | ||
| SR1550CFS | 1550 | Both sides | 400 | 1950 | Red / silver grey |
| SR210P | 210 | Single side | 100 | 310 | Red / silver grey / black / white |
| SR600CFS | 600 | Both sides | 200 | 410 | Red / silver grey / black / white |
*These are all nominal value
Application
-
Aerospace Insulation
-
Expansion Joint
-
Firefighter
-
Furnance Curtains
-
Welding Blanket